Manual Web Site Manual App Manual

Fire Extinguisher Inspection

The fire extinguisher inspection section allows a user to create and record a fire extinguisher inspection. Fire extinguisher inspections can be created from scratch or from a company fire extinguisher inspection. Job Sites can be setup to require employees to complete fire extinguisher inspections.

Since each job site is different, safetynet allows a field staff to setup a specific fire extinguisher inspection for each job site. Each Fire Extinguisher Inspection for a job site is set up with a number of sections; basic information, then fire extinguisher details.

Once a fire extinguisher inspection is submitted:

  1. An email can be sent to the person in charge of the fire extinguisher inspections. (For more information about email alerts check the email alerts section of the manual)
  2. Tasks that are marked as requiring attention are added to a maintenance report, once the inspection is submitted.
  3. Safety Net Statistics are updated for number of fire extinguisher inspections completed for companies, customers, and jobsites.

Maintenance Report Creation

Maintenance Reports are created for tasks that require attention, once a fire extinguisher inspection is submitted to SafetyNet. The following reports also create maintenance reports when submitted:

  1. Vehicle Inspections
  2. Personal Protective Equipment Inspections
  3. Equipment Inspections
  4. First Aid Kit Inspections
  5. Fire Extinguisher Inspections

For more information about Maintenance Reports in this manual click here to view the maintenance section.

Configuring how often Fire Extinguisher Inspections are to Occur

How often fire extinguisher inspections must occur is a function of your companies policy regarding fire extinguisher inspections. To configure Safety Net for how often fire extinguisher inspections for job sites should occur can be configured in the company safety settings.

Management, Office Staff and Safety Officers can edit how often fire extinguisher inspections should occur in the Company section when they edit the Company Safety settings. For more information about configuring your company safety settings in this manual click here to view the company section.

Configuring Jobsite Fire Extinguisher Inspection requirement

Job Sites come in all shapes and sizes especially in the service business, it just might not be practical for field staff to complete fire extinguisher inspection for every job site they visit. SafetyNet allows clients to customize their system to their business situation. To this end SafetyNet allows management, safety officers and office staff to configure Job Sites to require or not to require fire extinguisher inspections. For more information about changing the Job Site, fire extinguisher inspection requirement in this manual click here to view the Company Fire Extinguisher Inspection section.

Creating Company Fire Extinguisher Inspection for Jobsites

The Company Fire Extinguisher Inspections section allows companies to develop the fire extinguisher inspections documents, without having to carry out a fire extinguisher inspection. For more information about managing company fire extinguisher inspections in this manual click here to view the Company Fire Extinguisher Inspection section.

The fire extinguisher inspection section is only available to users that have the fire extinguisher inspection section turned on for their users group. To change users access to fire extinguisher inspections, management and office staff can change access in Application Section to view the information about the Application Section Click Here

Table of Contents
#Section Name#Section Name#Section Name
1Add Fire Extinguisher Inspection From Company Job Site Fire Extinguisher Inspection 2Add Fire Extinguisher Inspection From Company Vehicle Fire Extinguisher Inspection 3Add Fire Extinguisher Inspection for Job Site
4Add Fire Extinguisher Inspection for Vehicle 5Look Up Open Fire Extinguisher Inspection 6Edit Fire Extinguisher Inspection Details
7Add Employee Signature 8Add Fire Extinguisher Location 9Look Up Fire Extinguisher Location
10Edit Fire Extinguisher Location 11Delete Fire Extinguisher Location 12Submit Fire Extinguisher Inspection
13Delete Fire Extinguisher Inspection 14View Closed Fire Extinguisher Inspection 15Update Fire Extinguisher Inspections

1.Add Fire Extinguisher Inspection From Company Job Site Fire Extinguisher Inspection
Steps
  1. From the Main Menu screen, tap the On Inspection button.
  2. Then tap on the Fire Extinguisher Inspection button.
  3. This opens the Add Fire Extinguisher Inspection From Company Fire Extinguisher Inspection choose screen.
  4. Tap the Add Fire Extinguisher Inspection for Job Site button.
  5. Date: The date field allow field staff to choose the date the fire extinguisher inspection occurs.
    1. Tap the Date button to open the Choose Date screen.
    2. Scroll the calender screen and select the date from the calender.
  6. Time: The time field allow field staff to choose the time the fire extinguisher inspection occurs.
    1. Tap the Time button to open the Choose Time screen.
    2. Scroll the clock screen and select the time from the clock.
  7. Job Site Company Fire Extinguisher Inspections select box.

    8. Job Site Names are listed in descending order job site name.

    Note: Company Fire Extinguisher Inspections by nature will be updated and added to the list all the time, so it may be necessary to update the list click here.

    1. Scroll the list of job sites until the desired job site is displayed on the screen.
    2. Tap the desired job site to select it or tap Back in the top left corner to leave the Job Site field unchanged and return to the Add Site Inspection screen.
  8. Tap the Add Fire Extinguisher Inspection button to add the Fire Extinguisher Inspection.
    • A pop-up message that reads Fire Extinguisher Inspection Added indicates that the Fire Extinguisher Inspection is ready to have details to be entered and fire extinguisher locations to be inspected.
Step 1
Step 2
Step 3
Step 4
Step 5
Steps 6-7

2.Add Fire Extinguisher Inspection From Company Vehicle Fire Extinguisher Inspection
Steps
  1. From the Main Menu screen, tap the Inspection button.
  2. Then tap on the Fire Extinguisher Inspection button.
  3. This opens the Add Fire Extinguisher Inspection From Company Fire Extinguisher Inspection choose screen.
  4. Tap the Add Fire Extinguisher Inspection for Vehicle button.
  5. Date: The date field allow field staff to choose the date the fire extinguisher inspection occurs.
    1. Tap the Date button to open the Choose Date screen.
    2. Scroll the calender screen and select the date from the calender.
  6. Time: The time field allow field staff to choose the time the fire extinguisher inspection occurs.
    1. Tap the Time button to open the Choose Time screen.
    2. Scroll the clock screen and select the time from the clock.
  7. Vehicle Company Fire Extinguisher Inspections select box.

    8. >Vehicle are listed in descending order with the vehicle description.

    1. Scroll the list of vehicles until the desired vehicle is displayed on the screen.
    2. Tap the desired vehicle to select it.
  8. Tap the Add Fire Extinguisher Inspection button to add the Fire Extinguisher Inspection.
    • A pop-up message that reads Fire Extinguisher Inspection Added indicates that the Fire Extinguisher Inspection is ready to have details to be entered and fire extinguisher locations to be inspected.
Step 1
Step 2
Step 3
Step 4
Step 5
Steps 6-7

3.Add Fire Extinguisher Inspection for Job Site
Steps
  1. From the Main Menu screen, tap the On Inspection button.
  2. Then tap on the Fire Extinguisher Inspection button.
  3. This opens the Add Fire Extinguisher Inspection From Company Fire Extinguisher Inspection choose screen.
  4. Then tap the new tab on the top of the screen, this opens the Add Fire Extinguisher Inspection From Job site or Vehicle choose screen.
  5. Tap the Add Fire Extinguisher Inspection for Job Site button.
  6. Date: The date field allow field staff to choose the date the fire extinguisher inspection occurs.
    1. Tap the Date button to open the Choose Date screen.
    2. Scroll the calender screen and select the date from the calender.
  7. Time: The time field allow field staff to choose the time the fire extinguisher inspection occurs.
    1. Tap the Time button to open the Choose Time screen.
    2. Scroll the clock screen and select the time from the clock.
  8. Job Site select box.

    9. Job Site Names are listed in descending order job site name.

    Note: Job Sites by nature will be updated and added to the list all the time, so it may be necessary to update the list click here.

    1. Scroll the list of job sites until the desired job site is displayed on the screen.
    2. Tap the desired job site to select it or tap Back in the top left corner to leave the Job Site field unchanged and return to the Add Site Inspection screen.
  9. Tap the Add Fire Extinguisher Inspection button to add the Fire Extinguisher Inspection.
    • A pop-up message that reads Fire Extinguisher Inspection Added indicates that the Fire Extinguisher Inspection is ready to have details to be entered and fire extinguisher locations to be inspected.
Step 1
Step 2
Step 3
Step 4
Step 5
Steps 6-7

4.Add Fire Extinguisher Inspection for Vehicle
Steps
  1. From the Main Menu screen, tap the Inspection button.
  2. Then tap on the Fire Extinguisher Inspection button.
  3. This opens the Add Fire Extinguisher Inspection From Company Fire Extinguisher Inspection choose screen.
  4. Then tap the new tab on the top of the screen, this opens the Add Fire Extinguisher Inspection From Job site or Vehicle choose screen.
  5. Tap the Add Fire Extinguisher Inspection for Vehicle button.
  6. Date: The date field allow field staff to choose the date the fire extinguisher inspection occurs.
    1. Tap the Date button to open the Choose Date screen.
    2. Scroll the calender screen and select the date from the calender.
  7. Time: The time field allow field staff to choose the time the fire extinguisher inspection occurs.
    1. Tap the Time button to open the Choose Time screen.
    2. Scroll the clock screen and select the time from the clock.
  8. Vehicle select box.

    9. >Vehicle are listed in descending order with the vehicle description.

    1. Scroll the list of vehicles until the desired vehicle is displayed on the screen.
    2. Tap the desired vehicle to select it.
  9. Tap the Add Fire Extinguisher Inspection button to add the Fire Extinguisher Inspection.
    • A pop-up message that reads Fire Extinguisher Inspection Added indicates that the Fire Extinguisher Inspection is ready to have details to be entered and fire extinguisher locations to be inspected.
Step 1
Step 2
Step 3
Step 4
Step 5
Steps 6-7

5.Look Up Open Fire Extinguisher Inspection

Once in the Fire Extinguisher Inspection section

Steps
  1. Tap the third tab on the menu, the Fire Extinguisher Inspection view.
  2. Scroll the list of Fire Extinguisher Inspections until the desired Fire Extinguisher Inspection is displayed on the screen. Listing the fire extinguisher inspection date in black text, the job site in black text.
  3. Tap on the Fire Extinguisher Inspection you would like to view. This loads the fire extinguisher inspection edit screen.
Steps 1-3

6.Edit Fire Extinguisher Inspection Details

The first step in completing a Fire Extinguisher Inspection is completing the details of the fire extinguisher inspection the date, and field staff employee whom conducted the fire extinguisher inspection.

Once on the Fire Extinguisher Inspection you would like to Edit, on the details tab.

Steps
  1. Date: The date field allow field staff to choose the date the fire extinguisher inspection occurs.
    1. Tap the Date button to open the Choose Date screen.
    2. Scroll the calender screen and select the date from the calender.
  2. Time: The time field allow field staff to choose the time the fire extinguisher inspection occurs.
    1. Tap the Time button to open the Choose Time screen.
    2. Scroll the clock screen and select the time from the clock.
  3. Tap the Employee select box.

    4. Employees are listed in descending order.

    1. Scroll the list of employee until the desired employee is displayed on the screen.
    2. Tap the desired employee to select it.
  4. Tap Edit Fire Extinguisher Inspection button to save any changes to the Fire Extinguisher Inspection Details.
    • A pop-up message that reads Fire Extinguisher Inspection Details have been Saved indicates that the fire extinguisher inspection details have been saved.
Step 1
Step 2
Steps 3-6

7.Add Employee Signature

The employee who conducts the Fire Extinguisher Inspection must provide an electronic signature to indicate that they took part in the fire extinguisher inspection.

Once on the Equipment Inspection you would like to Edit

Steps
  1. Tap the Employees Signature button to open the View Signature screen.
  2. Tap the Create new button to open the Signature Edit screen.
  3. Sign in the white space beneath the Save New Drawing Here label.
  4. Tap Save in the top right corner of the screen to update the Signature field.
Step 1
Step 2
Step 3

8.Add Fire Extinguisher Location

The Fire Extinguisher Location section of the Fire Extinguisher Inspection, allows users to add fire extinguisher locations for a job site.SafetyNet includes information about the location and type of fire extinguisher to make it easier for future inspections, adding this information will allow field staff to know where all fire extinguishers are located for a job site.

Once on the Fire Extinguisher Inspection you would like to view

Steps
  1. Tap on the second tab, the Fire Extinguisher icon at the bottom of the screen to open the Fire Extinguisher Location screen. The screen loads opens with a list of fire extinguisher locations, with the location, and fire extinguisher description in black text.
  2. Tap the Add button on the top right corner, this loads the add fire extinguisher location screen.
    3. Fields
  3. Location Description: The location description field allows field staff to enter a description of where the fire extinguisher is located. The Character limit of the field is 250.
  4. Fire Extinguisher Description: The fire extinguisher description field allows field staff to enter a description of the fire extinguisher. The Character limit of the field is 250.
  5. Extinguisher Size: The extinguisher size field allows field staff to enter the size of the fire extinguisher. The field is a numeric value.
  6. Extinguisher Type: The extinguisher type field allows field staff to select the type of fire extinguisher is located.
    1. Scroll the list of extinguisher types until the desired extinguisher type is displayed on the screen.
    2. Tap the desired extinguisher type to select it.
  7. Recharged Date: The recharge date field allow field staff to choose the date fire extinguisher was last recharged.
    1. Tap the Date button to open the Choose Date screen.
    2. Scroll the calender screen and select the date from the calender.
  8. Has Pin: The Has Pin field is a prompt for field staff to check to ensure the fire extinguisher has its pin still properly inserted.
    1. Scroll the list of yes or no until the desired status is displayed on the screen.
    2. Tap the desired status to select it.
  9. Checked: The Checked field allows users to mark that they have checked the fire extinguisher location and either it is satisfactory (Sat.) or it requires attention (Req.)
    • Not Checked: means task has not been checked.
    • Satisfactory: means inspection tasks has been found to be satisfactory.
    • Requires Attention: means inspection tasks has been found to be requires attention. Any task marked as Req. requires a description of the issue to be written in the deficiency or comments field.
    • Tap the desired selection.
  10. Deficiency / Additional Comments: The deficiency and additional comments field allows field staff to enter a description of the issues found for the fire extinguisher location. The Character limit of the field is 250.
  11. Tap the Add Fire Extinguisher Location button, to add the a fire extinguisher location.
Steps 1-2
Steps 3-11

9.Look Up Fire Extinguisher Location

Once on the Fire Extinguisher Inspection you would like to view

Steps
  1. Tap on the second tab, the Fire Extinguisher Inspection icon at the bottom of the screen to open the Fire Extinguisher Location screen. The screen loads opens with a list of fire extinguisher locations with the location and description in blue text and comments in red text.
  2. Scroll the list of Fire Extinguisher Locations until the desired location is displayed on the screen.
  3. Tap on the desired location. This loads the edit Fire Extinguisher Location screen.
Steps 1-3

10.Edit Fire Extinguisher Location

Once on the edit Fire Extinguisher Location screen

Fields
  1. Location Description: The location description field allows field staff to enter a description of where the fire extinguisher is located. The Character limit of the field is 250.
  2. Fire Extinguisher Description: The fire extinguisher description field allows field staff to enter a description of the fire extinguisher. The Character limit of the field is 250.
  3. Extinguisher Size: The extinguisher size field allows field staff to enter the size of the fire extinguisher. The field is a numeric value.
  4. Extinguisher Type: The extinguisher type field allows field staff to select the type of fire extinguisher is located.
    1. Scroll the list of extinguisher types until the desired extinguisher type is displayed on the screen.
    2. Tap the desired extinguisher type to select it.
  5. Recharged Date: The recharge date field allow field staff to choose the date fire extinguisher was last recharged.
    1. Tap the Date button to open the Choose Date screen.
    2. Scroll the calender screen and select the date from the calender.
  6. Has Pin: The Has Pin field is a prompt for field staff to check to ensure the fire extinguisher has its pin still properly inserted.
    1. Scroll the list of yes or no until the desired status is displayed on the screen.
    2. Tap the desired status to select it.
  7. Checked: The Checked field allows users to mark that they have checked the fire extinguisher location and either it is satisfactory (Sat.) or it requires attention (Req.)
    • Not Checked: means task has not been checked.
    • Satisfactory: means inspection tasks has been found to be satisfactory.
    • Requires Attention: means inspection tasks has been found to be requires attention. Any task marked as Req. requires a description of the issue to be written in the deficiency or comments field.
    • Tap the desired selection.
  8. Deficiency / Additional Comments: The deficiency and additional comments field allows field staff to enter a description of the issues found for the fire extinguisher location. The Character limit of the field is 250.
  9. Tap the Save button, to edit the a fire extinguisher location.
Steps 1-4
Steps 5
Steps 6-9

11.Delete Fire Extinguisher Location

Once on the Fire Extinguisher Inspection you would like to view

Steps
  1. Tap on the second tab, the Fire Extinguisher Inspection icon at the bottom of the screen to open the Fire Extinguisher Location screen. The screen loads opens with a list of fire extinguisher locations with the location and description in blue text and comments in black text.
  2. Scroll the list of Fire Extinguisher Locations until the desired location is displayed on the screen.
  3. Long Tap the fire extinguisher inspection to bring up the delete screen for the fire extinguisher inspection.
  4. Tap the Delete button. The fire extinguisher inspection will be deleted.
Steps 1-2
Steps 3-4

12.Submit Fire Extinguisher Inspection

Once on the Fire Extinguisher Inspection you would like to Submit, all the fire extinguisher locations have been added and inspected and the inspection has been signed off on.

Steps
  1. Tap the Submit Fire Extinguisher Inspection button.
Step 1

13.Delete Fire Extinguisher Inspection

Once in the Fire Extinguisher Inspection section

Steps
  1. Tap the second tab on the menu, the Fire Extinguisher Inspection view.
  2. Scroll the list of Fire Extinguisher Inspections until the desired Fire Extinguisher is displayed on the screen. Listing the fire extinguisher date in black text, the job site in black text.
  3. Long Tap the fire extinguisher inspection to bring up the delete screen for the fire extinguisher inspection.
  4. Tap the Delete button. The fire extinguisher inspection will be deleted.
Steps 1-4

14.View Closed Fire Extinguisher Inspection

After Fire Extinguisher Inspections have been closed out, they will be available to look at through the History view on the iPhone Application.

Once on the Fire Extinguisher Inspection section

Steps
  1. Tap the third tab on the menu, the History tab of the main menu view. This loads with a list of the closed out Fire Extinguisher Inspections listing the fire extinguisher inspection date in blue text, job site name in black text.
  2. Scroll the list of Fire Extinguisher Inspections until the desired Fire Extinguisher Inspection is displayed on the screen.
  3. Tap on the Fire Extinguisher Inspection you would like to view. This loads the first tab, the fire extinguisher inspection details, which loads with the fire extinguisher inspection date, job site name, and the employee whom conducted the fire extinguisher inspection at the top.
  4. Tap the second tab, the Fire Extinguisher Inspection Location lists the fire extinguisher locations on the fire extinguisher inspection.
  5. Tap the Location to view the details of that location.
Steps 1-2
Step 3
Steps 4
Steps 5

15.Update Fire Extinguisher Inspections

As other field staff and employee's perform fire extinguisher inspections the library of company fire extinguisher inspections for field staff to use will grow. Also as field staff perform fire extinguisher inspections with other staff there will be a need for field staff to update their IPhone application.

Steps
  1. From the Menu screen, tap the Updates button.
  2. Scroll the list of sections until you find the Fire Extinguisher Inspection button.
  3. Tap on the Fire Extinguisher Inspection button.
Step 1
Steps 2-3